Today we will talk about how to install solar panel to your building. If you wonder how to install a solar panel, you should never miss this article. You can also see other details about solar panel, on our web site. Now we can take a look at the solar panel installation subject from below.
Installation of a solar panel system
The solar panel system is ordered, delivered and must be delivered to its destination. If it is not a professional large-scale plant, the solar generator will probably find its place on a roof. If the plant was planned by a solar specialist company, it will take over the assembly of the solar modules – or a craftsman commissioned by it.
However, some future operators of the solar system would like to install them themselves. Then the first thing to do is to choose the right mounting system. This point should also be discussed with the solar specialist, who has indeed offered a specific mounting system.
How can I install a solar panel to my home?
Tip: For self-assembly, make sure that the electrical connections and connections are carried out by a specialist!
A very important point before installation is the decision for the right mounting system. This decision is not only based on the type of roof, but also depends on which solar modules you have decided how heavy these are, whether with frame or without and how high the burden of wind or snow can fail.
Installation of Solar Panel- Mounting systems for flat roofs
Flat roofs are very well suited for photovoltaic systems. Solar modules are mounted here elevated. Because then the solar modules can be mounted in the correct inclination and above all in the optimal alignment. There are different solutions for this.
There are corresponding metal racks, usually made of aluminum, which are mounted with screws or other connections on the roof. The modules are attached to these with suitable clips. However, these systems have the disadvantage that the roof skin is penetrated and there is a risk of leaks.
Other fastening systems are weighted with weights on the roof. Some systems are bolted together to increase overall stability and are only attached to the edges of the roof. There are also large plastic tubs that are weighted to provide sufficient stability. These systems have the disadvantage of being very heavy, so that the statics of the roof is often overburdened.
